'

Search results

Found 1305 matches
Circle equation in polar system

The general equation for a circle with a center not necessary at the pole, gives the length of the radius of the circle.
The polar coordinate system ... more

Thin lens formula

A lens is a transmissive optical device which affects the focusing of a light beam through refraction. A simple lens consists of a single piece of ... more

Synodic Period

The orbital period is the time taken for a given object to make one complete orbit around another object.When mentioned without further qualification in ... more

Boyle's law

Boyle’s law is an experimental gas law which describes how the pressure of a gas tends to decrease as the volume of a gas increases. The absolute ... more

Cantilever Euler Beam - Maximum Displacement

Euler–Bernoulli beam theory (also known as engineer’s beam theory or classical beam theory) is a simplification of the linear theory of elasticity ... more

Roller screw (ratio of roller thread pitch to screw lead)

A roller screw, also known as a planetary roller screw or satellite roller screw, is a low-friction precision screw-type actuator, a mechanical device for ... more

Allowable Strength Design Load combination (eq8)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Allowable Strength Design Load combination (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Tritration ( concentration of the analyte)

Titration, also known as titrimetry or volumetric analysis, is a common laboratory method of quantitative chemical analysis that is used to determine the ... more

Mach Number (subsonic, calculated from Pitot Tube Pressure)

In fluid mechanics, Mach number (M or Ma) is a dimensionless quantity representing the ratio of speed of an object moving through a fluid and the local ... more

...can't find what you're looking for?

Create a new formula