'

Search results

Found 1057 matches
Speed of Sound (air, ideal gases)

The speed of sound is the distance travelled per unit time by a sound wave propagating through an elastic medium. The SI unit of the speed of sound is the ... more

Conical pendulum

A conical pendulum is a weight (or bob) fixed on the end of a string (or rod) suspended from a pivot. Its construction is similar to an ordinary pendulum; ... more

Velocity at a distance x (for object following a ballistic trajectory)

A trajectory or flight path is the path that a moving object follows through space as a function of time. A trajectory can be described mathematically ... more

Cutoff Frequency in Electronic Low-Pass Filters

A low-pass filter is a filter that passes signals with a frequency lower than a certain cutoff frequency and attenuates signals with frequencies higher ... more

London penetration depth

In superconductors, the London penetration depth (usually denoted as λ or λ_L) characterizes the distance to which a magnetic field penetrates into a ... more

Present value of a perpetuity (Present Value of Int Factor Annuity)

A perpetuity is payments of a set amount of money that occur on a routine basis and continues forever. Present value of a perpetuity is an infinite and ... more

Hydraulic conductivity (Constant-head method)

Hydraulic conductivity is a property of vascular plants, soils and rocks, that describes the ease with which a fluid (usually water) can move through pore ... more

Eight foot pitch

The pipe organ is a musical instrument commonly used in churches or cathedrals that produces sound by driving pressurized air (called wind) through pipes ... more

Allowable Strength Design Load combination (eq7)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Worksheet 324

The main span of San Francisco’s Golden Gate Bridge is 1275 m long at its coldest. The bridge is exposed to temperatures ranging from –15ºC to 40ºC . (a) What is its change in length between these temperatures? Assume that the bridge is made entirely of steel.

Strategy

Use the equation for linear thermal expansion to calculate the change in length , ΔL . Use the coefficient of linear expansion, α ,for steel from Table 13.2, and note that the change in temperature, ΔT , is 55ºC

Thermal Expansion - Linear

(b) convert the change in temperature if Kelvin and Fahrenheit degrees. **
**this section is not included in the Reference material

Celsius <-> Kelvin
Celsius <-> Fahrenheit

Discussion

Although not large compared with the length of the bridge, this change in length is observable. It is generally spread over many expansion joints so that the expansion at each joint is small.

Reference : OpenStax College,College Physics. OpenStax College. 21 June 2012.
http://openstaxcollege.org/textbooks/college-physics
Creative Commons License : http://creativecommons.org/licenses/by/3.0/

...can't find what you're looking for?

Create a new formula