'

Search results

Found 1151 matches
Miles Equation

In 1954, Miles developed his version of this equation for GRMS as he was researching fatigue failure of aircraft structural ... more

Leadscrew Frictional Torque of the Thrust Collar

A leadscrew (or lead screw), also known as a power screw or translation screw, is a screw used as a linkage in a machine, to translate turning motion into ... more

Bending moments at any point along the span of a cantilevered beam with the free end supported on a roller

A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is forced against by a moment and shear stress. A ... more

Influence of the wind on a building

A building is a man-made structure with a roof and walls standing more or less permanently in one place. In general when the wind blows on a building then ... more

Johnson-Kendall-Roberts (JKR) model of elastic contact between two spheres ( pull-off force)

Contact mechanics is the study of the deformation of solids that touch each other at one or more points.When two solid surfaces are brought into close ... more

Self-buckling critical height ( for a free-standing, vertical column)

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Bearing capacity for square foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Bearing capacity for circular foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Bearing capacity for continuous foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Cantilever Euler Beam - Maximum Displacement

Euler–Bernoulli beam theory (also known as engineer’s beam theory or classical beam theory) is a simplification of the linear theory of elasticity ... more

...can't find what you're looking for?

Create a new formula