'

Search results

Found 1738 matches
Force between two nearby magnetized surfaces (relative to flux density)

The Gilbert model assumes that the magnetic forces between magnets are due to magnetic charges near the poles. This model produces good approximations that ... more

Energy Density of electric and magnetic fields

Energy density is the amount of energy stored in a given system or region of space per unit volume or mass, though the latter is more accurately termed ... more

Electrical Impedances - Phase in Series

Electrical impedance is the measure of the opposition that a circuit presents to a current when a voltage is applied. The term complex impedance may be ... more

Electrical Impedances - Magnitude

Electrical impedance is the measure of the opposition that a circuit presents to a current when a voltage is applied. The term complex impedance may be ... more

Strouhal number (In metrology)

In dimensional analysis, the Strouhal number is a dimensionless number describing oscillating flow mechanisms.
In metrrology, specifically axial-flow ... more

Specific absorption rate (SAR)

Specific absorption rate calculates the rate at which energy is absorbed by the body when exposed to a radio frequency (RF) electromagnetic field. Specific ... more

Specific absorption rate - with Electric intensity

Specific absorption rate (SAR) is a measure of the rate at which energy is absorbed by the human body when exposed to a radio ... more

London penetration depth

In superconductors, the London penetration depth (usually denoted as λ or λ_L) characterizes the distance to which a magnetic field penetrates into a ... more

Arbitrary-amplitude period of pendulum

A pendulum is a body suspended from a fixed support so that it swings freely back and forth under the influence of gravity. A so-called “simple ... more

Force between two bar magnets

The Gilbert model assumes that the magnetic forces between magnets are due to magnetic charges near the poles. This model produces good approximations that ... more

...can't find what you're looking for?

Create a new formula