'

Search results

Found 634 matches
Karman line (lift force)

Karman line, lies at an altitude of 100 kilometers (62 mi) above the Earth’s sea level, and commonly represents the boundary between the ... more

Depth of the contact region between a rigid conical indenter and an elastic half-space

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Allowable Strength Design Load combination (eq2)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq5)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Voltage gain (for equal impedances)

The power gain can be calculated using voltage instead of power using Joule’s first law to calculate a voltage gain. In many cases, the input and ... more

Friis Transmission equation

The Friis transmission equation is used in telecommunications engineering, and gives the power received by one antenna under idealized conditions given ... more

Link Budget - Received Power

A link budget is accounting of all of the gains and losses from the transmitter, through the medium (free space, cable, waveguide, fiber, etc.) to the ... more

RC circuit (Voltage of the resistor at Series circuit)

A resistor–capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors driven by a voltage or ... more

Capital Adequacy Ratio

Capital Adequacy Ratio (CAR), also known as Capital to Risk (Weighted) Assets Ratio (CRAR), is the ... more

RC circuit (Voltage of the capacitor at Series circuit

A resistor–capacitor circuit (RC circuit), or RC filter, is an electric circuit composed of resistors and capacitors driven by a voltage or current source. ... more

...can't find what you're looking for?

Create a new formula