'

Search results

Found 1037 matches
Elastic deflection to an end loaded cantilever beam

In engineering, deflection is the degree to which a structural element is displaced under a load.
The elastic deflection of a weightless cantilever ... more

Elastic deflection of a center loaded beam supported by two simple supports.

In engineering, deflection is the degree to which a structural element is displaced under a load.
The elastic deflection of a beam, loaded at its ... more

Moment of inertia of a thick-walled cylindrical tube ( Axis at the center of the cylinder perpendicular to its height)

Moment of inertia is the mass property of a rigid body that defines the torque needed for a desired angular acceleration about an axis of rotation. Moment ... more

Shaft bending moment due to yaw (2-bladed rotor)

The shaft bending moment due to yaw depends on the blades of the rotor. In this case the rotor has 2 blades

... more

Moment of inertia of a torus of tube (about a diameter)

Mass moment of inertia measures the extent to which an object resists rotational acceleration about an axis, and is the rotational analogue to mass.
A ... more

Cantilever Euler Beam - Displacement

Euler–Bernoulli beam theory (also known as engineer’s beam theory or classical beam theory) is a simplification of the linear theory of elasticity ... more

Cantilever Euler Beam - Maximum Displacement

Euler–Bernoulli beam theory (also known as engineer’s beam theory or classical beam theory) is a simplification of the linear theory of elasticity ... more

Elastic deflection at any point along the span of a center loaded beam

Elastic deflection is the degree to which a structural element is displaced under a load.
The deflection at any point, along the span of a center ... more

Angle of deflection of an end loaded cantilever beam

In engineering, deflection is the degree to which a structural element is displaced under a load. It may refer to an angle or a distance.
The angle of ... more

Precession (Torque-free)

Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the ... more

...can't find what you're looking for?

Create a new formula