'

Search results

Found 1886 matches
Hydraulic conductivity (Falling-head method)

Hydraulic conductivity is a property of vascular plants, soils and rocks, that describes the ease with which a fluid (usually water) can move through pore ... more

Drainage Hooghoudt's equation

A drainage equation is an equation describing the relation between depth and spacing of parallel subsurface drains, depth of the watertable, depth and ... more

Hydraulic conductivity (Constant-head method)

Hydraulic conductivity is a property of vascular plants, soils and rocks, that describes the ease with which a fluid (usually water) can move through pore ... more

Darcy friction factor - Free surface flow

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Shear stress (acting on the bed of a channel)

For a channel that is at an angle a from horizontal, the shear component of the stress acting on the bed , which is the component acting ... more

Wave shoaling height

In fluid dynamics, wave shoaling is the effect by which surface waves entering shallower water change in wave height. It is caused by the fact that the ... more

Darcy's law (simplified)

Darcy’s law states that the volume of flow of the pore fluid through a porous medium per unit time is proportional to the rate of change of excess ... more

Hydraulic diameter

For flow in a pipe or a sphere moving in a fluid the internal diameter is generally used today. Other shapes such as rectangular pipes or non-spherical ... more

Reynolds number - Flow in a pipe with mass flow rate

For flow in a pipe or tube, the Reynolds number is generally defined as presented here.

For shapes such as squares, rectangular or annular ducts ... more

Darcy friction factor - Colebrook–White equation (relative to the radius)

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

...can't find what you're looking for?

Create a new formula