'

Search results

Found 1061 matches
Ratiometric Correction of Transducer Output ( output voltage )

Piezoresistive transducers configured as Wheatstone bridges. often exhibit ratiometric behavior with respect not only to the measured pressure, but also ... more

Maximum Pressure on a Contact Area between two cylinders with parallel axes

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Pressure to depth (empirical formula - fresh water)

In fresh water, there is an approximate numerical equivalence between the change in pressure in decibars and the change in depth from the surface in ... more

Cross Section (discrete events)

The cross section is an effective area that quantifies the intrinsic likelihood of a scattering event when an incident beam strikes a target object, made ... more

Vertical Hyperbola (Standard Equation)

Hyperbola is the set of all points in the plane, such that the absolute value of the difference of each of the distances from two fixed points is constant. ... more

Horizontal Hyperbola (Standard Equation)

Hyperbola is the set of all points in the plane, such that the absolute value of the difference of each of the distances from two fixed points is constant. ... more

Bernoulli's principle

Bernoulli’s principle states that for an inviscid flow, an increase in the speed of the fluid occurs simultaneously with an increase in dynamic ... more

Specific internal energy

Specific internal energy is the internal energy per unit mass.

... more

Maximum contact pressure between a rigid cylinder and an elastic half-space

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Heat capacity ratio

Heat capacity, or thermal capacity, is a measurable physical quantity equal to the ratio of the heat added to (or subtracted from) an object to the ... more

...can't find what you're looking for?

Create a new formula