'

Search results

Found 1775 matches
Sag curve length when S>L (Vertical curves for highway design)

When a driver is driving on a sag curve at night, the sight distance is limited by the higher grade in front of the vehicle. This distance must be long ... more

Impact shear

Shear stress, is defined as the component of stress coplanar with a material cross section. Shear stress arises from the force vector component parallel to ... more

Laplace domain ( series RLC circuit)

The series RLC can be analyzed for both transient and steady AC state behavior using the Laplace transform. If the voltage source ... more

Runoff curve number

Surface runoff is the water flow that occurs when the soil is infiltrated to full capacity and excess water from rain. The runoff curve number (also called ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq5)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Rayleigh range ( confocal parameter)

In optics and especially laser science, the Rayleigh length or Rayleigh range is the distance along the propagation direction of a beam from the waist to ... more

Exhaust Gas Velocity

A rocket engine nozzle is a propelling nozzle (usually of the de Laval type) used in a rocket engine to expand and accelerate the combustion gases produced ... more

's' parameter for the Critical Hall parameter

The electrothermal instability (also known as the ionization instability) is a magnetohydrodynamic (MHD) instability appearing in ... more

Allowable Strength Design Load combination (eq8)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Allowable Strength Design Load combination (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

...can't find what you're looking for?

Create a new formula