'

Search results

Found 1359 matches
Calibrated airspeed from impact pressure - Subsonic speed

Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.

When flying at sea level ... more

Calibrated airspeed from impact pressure - Supersonic speed

Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.

When flying at sea level ... more

Clausius–Clapeyron relation

The Clausius–Clapeyron relation, named after Rudolf Clausius and Benoît Paul Émile Clapeyron, is a way of characterizing a discontinuous phase transition ... more

Volume thermal expansion coefficient

Thermal expansion is the tendency of matter to change in volume in response to a change in temperature through heat transfer. For a solid, we can ignore ... more

Coefficient Of Performance for a non perfectly reversible cooler

Pulse tube cryocooler(or refrigerator) can be made without moving parts in the low temperature part of the device, making the cooler suitable for a wide ... more

Coefficient Of Performance for a perfectly reversible cooler

Pulse tube cryocooler(or refrigerator) can be made without moving parts in the low temperature part of the device, making the cooler suitable for a wide ... more

Future value of an annuity

Future value of an annuity is the future value of a stream of payments (annuity), assuming the payments are invested at a given rate of interest. The ... more

Worksheet 302

In the wheelbarrow of the following figure the load has a perpendicular lever arm of 7.50 cm, while the hands have a perpendicular lever arm of 1.02 m.(a) What upward force must you exert to support the wheelbarrow and its load if their combined mass is 45.0 kg? (b) What force does the wheelbarrow exert on the ground?


(a) In the case of the wheelbarrow, the output force or load is between the pivot and the input force. The pivot is the wheel’s axle. Here, the output force is greater than the input force. Thus, a wheelbarrow enables you to lift much heavier loads than you could with your body alone. (b) In the case of the shovel, the input force is between the pivot and the load, but the input lever arm is shorter than the output lever arm. The pivot is at the handle held by the right hand. Here, the output force (supporting the shovel’s load) is less than the input force (from the hand nearest the load), because the input is exerted closer to the pivot than is the output.

Strategy

Here, we use the concept of mechanical advantage.

Force (Newton's second law)
Mechanical Advantage - Law of Lever
Subtraction

Discussion
An even longer handle would reduce the force needed to lift the load. The MA here is:

Division

Reference : OpenStax College,College Physics. OpenStax College. 21 June 2012.
http://openstaxcollege.org/textbooks/college-physics
Creative Commons License : http://creativecommons.org/licenses/by/3.0/

Wind Chill - North American and UK - Fahrenheit scale

Wind-chill or windchill, (popularly wind chill factor) is the perceived decrease in air temperature felt by the body on exposed skin due to the flow of ... more

Wind Chill - North American and UK - Celsius scale

Wind-chill or windchill, (popularly wind chill factor) is the perceived decrease in air temperature felt by the body on exposed skin due to the flow of ... more

...can't find what you're looking for?

Create a new formula