'

Search results

Found 1498 matches
Area thermal expansion coefficient

Thermal expansion is the tendency of matter to change in length, area or volume in response to a change in temperature, through heat transfer.
The ... more

Instantaneous current for L3 (Three-phase electric application)

In electrical engineering, three-phase electric power systems have at least three conductors carrying alternating current voltages that are offset in time ... more

Area of a Reuleaux triangle

A Reuleaux triangle is a curve of constant width,( the separation of two parallel lines tangent to the curve is independent of their orientation), based ... more

Cissoid of Diocles (Cartesian coordinates)

The Cissoid of Diocles is a cubic plane curve member of the conchoid of de Sluze family of curves and in form it resembles a tractrix.( Tractix is the ... more

Time-varying instantaneous voltages for L1 (Three-phase electric application)

In electrical engineering, three-phase electric power systems have at least three conductors carrying alternating current voltages that are offset in time ... more

Rayleigh Scattering Cross-Section

Rayleigh scattering (pronounced /ˈreɪli/ RAY-lee), named after the British physicist Lord Rayleigh (John William Strutt), is the (dominantly) elastic ... more

Minimum railway curve radius (by the track gauge and the cant)

The minimum railway curve radius, the shortest allowable design radius for railway tracks under a particular set of conditions.
Track gauge is a ... more

Time-varying instantaneous voltages for L3 (Three-phase electric application)

In electrical engineering, three-phase electric power systems have at least three conductors carrying alternating current voltages that are offset in time ... more

Time-varying instantaneous voltages for L2 (Three-phase electric application)

In electrical engineering, three-phase electric power systems have at least three conductors carrying alternating current voltages that are offset in time ... more

Worksheet 324

The main span of San Francisco’s Golden Gate Bridge is 1275 m long at its coldest. The bridge is exposed to temperatures ranging from –15ºC to 40ºC . (a) What is its change in length between these temperatures? Assume that the bridge is made entirely of steel.

Strategy

Use the equation for linear thermal expansion to calculate the change in length , ΔL . Use the coefficient of linear expansion, α ,for steel from Table 13.2, and note that the change in temperature, ΔT , is 55ºC

Thermal Expansion - Linear

(b) convert the change in temperature if Kelvin and Fahrenheit degrees. **
**this section is not included in the Reference material

Celsius <-> Kelvin
Celsius <-> Fahrenheit

Discussion

Although not large compared with the length of the bridge, this change in length is observable. It is generally spread over many expansion joints so that the expansion at each joint is small.

Reference : OpenStax College,College Physics. OpenStax College. 21 June 2012.
http://openstaxcollege.org/textbooks/college-physics
Creative Commons License : http://creativecommons.org/licenses/by/3.0/

...can't find what you're looking for?

Create a new formula