Search results
The wetted perimeter is the perimeter of the cross sectional area that is “wet”. The term wetted perimeter is common in civil engineering, ... more
Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more
An isobaric process is a thermodynamic process in which the pressure stays constant: ΔP = 0. The heat transferred to the system does work, but also changes ... more
The Number of Transfer Units (NTU) Method is used to calculate the rate of heat transfer in heat exchangers (especially counter ... more
Henry’s law states : “At a constant temperature, the amount of a given gas that dissolves in a given type and volume of liquid is directly ... more
In science, buckling is a mathematical instability that leads to a failure mode.
When a structure is subjected to compressive stress, buckling may ... more
Energy density is the amount of energy stored in a given system or region of space per unit volume or mass, though the latter is more accurately termed ... more
Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.
When flying at sea level ... more
The Prandtl number (Pr) or Prandtl group is a dimensionless number, named after the German physicist Ludwig Prandtl, defined as the ratio of momentum ... more
FEV1/FVC (FEV1%) is the ratio of Forced expiratory volume in 1 second ( the volume of air that can forcibly be blown out in one ... more
...can't find what you're looking for?
Create a new formula