'

Search results

Found 1034 matches
Simplified von Mises equation - Pure shear

RESTRICTIONS : σ₁ = σ₂ = σ₃ = 0, σ₃₁ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials ... more

Simplified von Mises equation - Principal plane stress

RESTRICTIONS : σ₃ = 0, σ₁₂ = σ₁₃ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins ... more

Simplified von Mises equation - Principal stresses

RESTRICTIONS : σ₁₂ = σ₁₃ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when the ... more

Simplified von Mises equation - General plane stress

RESTRICTIONS : σ₃ = 0, σ₃₁ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when ... more

Barlow's formula - pipe

In the pipeline industry it is neccecary to verify that pipe used for gathering, transmission, and distribution lines can safely withstand operating ... more

Normal segment for a given line

The normal segment for a given line is defined to be the line segment drawn from the origin perpendicular to the line. This segment joins the origin with ... more

Screw Thread Engagement

Bolted joints are one of the most common elements in construction and machine design. They consist of fasteners that capture and join other parts, and are ... more

Mass of pressure Cylindrical vessel with hemispherical ends( capsule)

Pressure vessels are held together against the gas pressure due to tensile forces within the walls of the container. The normal (tensile) stress in the ... more

Stress in thin-walled pressure spherical vessels

Pressure vessels are held together against the gas pressure due to tensile forces within the walls of the container. Stress in a shallow-walled pressure ... more

Torque to lower a load (by lead screw-related to the coefficient of friction))

A leadscrew (or lead screw), also known as a power screw or translation screw, is a screw used as a linkage in a machine, to translate turning motion into ... more

...can't find what you're looking for?

Create a new formula