'

Search results

Found 1197 matches
Area of the spherical zone

Spherical zone is the surface of the solid defined by cutting a sphere with a pair of parallel planes excluding the top and bottom bases. The area can be ... more

Radius of the rim of a paraboloidal dish

The elliptic paraboloid is shaped like an oval cup and can have a maximum or minimum point. In a suitable coordinate system with three axes x, y, and z, it ... more

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of ... more

Vertical Forces at the wheels for a bicycle (rear wheel)

Though longitudinally stable when stationary, a bike may become longitudinally unstable under sufficient acceleration or deceleration. The normal ... more

Vertical Forces at the wheels for a bicycle (front wheel)

Though longitudinally stable when stationary, a bike may become longitudinally unstable under sufficient acceleration or deceleration. The normal ... more

Fourier number ( thermal )

The Fourier number (Fo) or Fourier modulus, is a dimensionless number that characterizes heat conduction. it is the ratio of diffusive/conductive transport ... more

Fourier Number (mass)

The Fourier number (Fo) or Fourier modulus, is a dimensionless number that characterizes heat conduction. It is the ratio of diffusive/conductive ... more

Tractive Force - Steam locomotives

As used in mechanical engineering, the term tractive force can either refer to the total traction a vehicle exerts on a surface, or the amount of the total ... more

Rayleigh range ( confocal parameter)

In optics and especially laser science, the Rayleigh length or Rayleigh range is the distance along the propagation direction of a beam from the waist to ... more

Gauckler–Manning–Strickler formula

The Manning formula is also known as the Gauckler–Manning formula, or Gauckler–Manning–Strickler formula in Europe. In the United States, in practice, it ... more

...can't find what you're looking for?

Create a new formula