'

Search results

Found 1061 matches
Blade root bending moment load due to yaw

The blade root bending moment due to the wind turbine yaw operation. The yaw rate can be calculated for passive yaw, or is defined by the design for active ... more

Precession - (Torque-induced - Classical Newtonian)

Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the ... more

Dynamic (shear) viscosity

The dynamic (shear) viscosity of a fluid expresses its resistance to shearing flows, where adjacent layers move parallel to each other with different ... more

Boundary layer thickness (For laminar boundary layers over a flat plate)

The boundary layer thickness is the distance across a boundary layer from the wall to a point where the flow velocity has essentially reached (99%)the ... more

Darcy's law (simplified)

Darcy’s law states that the volume of flow of the pore fluid through a porous medium per unit time is proportional to the rate of change of excess ... more

Power (aerodynamic drag)

In fluid dynamics, drag (sometimes called air resistance, a type of friction, or fluid resistance, another type of friction or fluid friction) is a force ... more

Shaft bending moment due to yaw (2-bladed rotor)

The shaft bending moment due to yaw depends on the blades of the rotor. In this case the rotor has 2 blades

... more

Apsis - Periapsis maximum speed

An apsis, plural apsidesis a point of greatest or least distance of a body in an elliptic orbit about a larger body. For a body orbiting the Sun the ... more

Apsis - Apoapsis minimum speed

An apsis, plural apsidesis a point of greatest or least distance of a body in an elliptic orbit about a larger body. For a body orbiting the Sun the ... more

Vis-Viva Equation with standard gravitational parameter

In astrodynamics, the vis viva equation, also referred to as orbital energy conservation equation, is one of the fundamental equations that govern the ... more

...can't find what you're looking for?

Create a new formula