'

Search results

Found 1488 matches
Ricco's Law

Several laws describe a human’s ability to visually detect targets on a uniform background. One such law is Riccò's law, discovered by astronomer ... more

Specific absorption rate - with Electric intensity

Specific absorption rate (SAR) is a measure of the rate at which energy is absorbed by the human body when exposed to a radio ... more

Nodal Precession

Nodal precession is the precession of an orbital plane around the rotation axis of an astronomical body such as Earth. This precession is due to the ... more

Specific absorption rate - with Current density

Specific absorption rate (SAR) is a measure of the rate at which energy is absorbed by the human body when exposed to a radio ... more

Worksheet 306

Calculate the force the biceps muscle must exert to hold the forearm and its load as shown in the figure below, and compare this force with the weight of the forearm plus its load. You may take the data in the figure to be accurate to three significant figures.


(a) The figure shows the forearm of a person holding a book. The biceps exert a force FB to support the weight of the forearm and the book. The triceps are assumed to be relaxed. (b) Here, you can view an approximately equivalent mechanical system with the pivot at the elbow joint

Strategy

There are four forces acting on the forearm and its load (the system of interest). The magnitude of the force of the biceps is FB, that of the elbow joint is FE, that of the weights of the forearm is wa , and its load is wb. Two of these are unknown FB, so that the first condition for equilibrium cannot by itself yield FB . But if we use the second condition and choose the pivot to be at the elbow, then the torque due to FE is zero, and the only unknown becomes FB .

Solution

The torques created by the weights are clockwise relative to the pivot, while the torque created by the biceps is counterclockwise; thus, the second condition for equilibrium (net τ = 0) becomes

Force (Newton's second law)
Torque
Force (Newton's second law)
Torque

Note that sin θ = 1 for all forces, since θ = 90º for all forces. This equation can easily be solved for FB in terms of known quantities,yielding. Entering the known values gives

Mechanical equilibrium - 3=3 Torque example

which yields

Torque
Addition

Now, the combined weight of the arm and its load is known, so that the ratio of the force exerted by the biceps to the total weight is

Division

Discussion

This means that the biceps muscle is exerting a force 7.38 times the weight supported.

Reference : OpenStax College,College Physics. OpenStax College. 21 June 2012.
http://openstaxcollege.org/textbooks/college-physics
Creative Commons License : http://creativecommons.org/licenses/by/3.0/

Nernst Equation - electrochemical half cell

In electrochemistry, the Nernst equation is an equation that relates the reduction potential of an electrochemical reaction (half-cell or full cell ... more

Fin Area on a Rocket

The size of the fins controls a rocket’s stability and the amount of weather cocking (turning into the wind). The best way to determine final fin ... more

Binoculars range (distance to an object)

Binoculars, field glasses or binocular telescopes are a pair of identical or mirror-symmetrical telescopes mounted side-by-side and aligned to point ... more

Vacuum tube - transconductance

In electronics, a vacuum tube, an electron tube, or colloquially a tube (North America) or valve (British usage), is a device that controls electric ... more

Backlash (due to tooth thickness changes)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

...can't find what you're looking for?

Create a new formula