'

Search results

Found 1560 matches
Allowable Strength Design Load combination (eq2)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Buckling Coefficient

In science, buckling is a mathematical instability that leads to a failure mode.

When a structure is subjected to compressive stress, buckling may ... more

Ball Screw - Tensile Compressive Load

A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical ... more

Drag coefficient

Drag (sometimes called air resistance, a type of friction, or fluid resistance, another type of friction or fluid friction) refers to forces acting ... more

Nγ bearing capacity factor (simplified)

Simplifications have been made to eliminate the need for Kpγ. One such was done by Coduto, given below, and it is accurate to within 10%

... more

Friction Loss (turbulent flow)

In fluid flow, friction loss (or skin friction) is the loss of pressure or “head” that occurs in pipe or duct flow due to the effect of the fluid’s ... more

Darcy friction factor - Goudar–Sonnad equation (Variable q)

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Flywheel energy storage (Energy density)

A flywheel is a rotating mechanical device that is used to store rotational energy. Flywheel energy storage works by accelerating a rotor to a very high ... more

Allowable Strength Design Load combination (eq3)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Wing loading - turning radius

In aerodynamics, wing loading is the total weight of an aircraft divided by the area of its wing. The stalling speed of an aircraft in straight, level ... more

...can't find what you're looking for?

Create a new formula