Search results

Found 584 matches
Leadscrew Frictional Torque of the Thrust Collar

A leadscrew (or lead screw), also known as a power screw or translation screw, is a screw used as a linkage in a machine, to translate turning motion into ... more

Shaft bending moment due to yaw (2-bladed rotor)

The shaft bending moment due to yaw depends on the blades of the rotor. In this case the rotor has 2 blades

... more

Internal conversion coefficient

Internal conversion is a radioactive decay process where an excited nucleus interacts electromagnetically with an electron in one of the lower atomic ... more

Critical speed for a leadscrew

The critical speed is the speed that excites the natural frequency of the screw. For a steel leadscrew or steel ballscrew, the critical speed is ... more

Buckling Coefficient

In science, buckling is a mathematical instability that leads to a failure mode.

When a structure is subjected to compressive stress, buckling may ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Miles Equation

In 1954, Miles developed his version of this equation for GRMS as he was researching fatigue failure of aircraft structural ... more

Convective heat transfer coefficient with Nusselt number for Internal/turbulent flow

Although convective heat transfer can be derived analytically through dimensional analysis, exact analysis of the boundary layer, approximate integral ... more

Time-domain reflectometry ( reflection coefficient-resistive load)

Time-domain reflectometry or TDR is a measurement technique used to determine the characteristics of electrical lines by ... more

Sound Pressure Level

Sound pressure or acoustic pressure is the local pressure deviation from the ambient (average, or equilibrium) atmospheric pressure, caused by a sound ... more

...can't find what you're looking for?

Create a new formula