'

Search results

Found 1002 matches
Couple balance

Rotating unbalance is the uneven distribution of mass around an axis of rotation. A rotating mass, or rotor, is said to be out of balance when its center ... more

Critical Speed of a Rotating Shaft - Rayleigh–Ritz method

In solid mechanics, in the field of rotordynamics, the critical speed is the theoretical angular velocity that excites the natural frequency of a rotating ... more

Blade root bending moment load due to yaw

The blade root bending moment due to the wind turbine yaw operation. The yaw rate can be calculated for passive yaw, or is defined by the design for active ... more

Parallel axis theorem ( at mass moment of inertia)

Parallel axis theorem ( Huygens –Steiner theorem) , can be used to determine the mass moment of inertia or the second moment of area of a rigid body about ... more

Torsional Pendulum (Period)

Torsion balances, torsion pendulums and balance wheels are examples of torsional harmonic oscillators that can oscillate with a rotational motion about the ... more

Compound pendulum (momemt of inertia)

A compound pendulum is a body formed from an assembly of particles or continuous shapes that rotates rigidly around a pivot. Its moments of inertia is the ... more

Compound pendulum ( ordinary frequency )

A compound pendulum is a body formed from an assembly of particles or continuous shapes that rotates rigidly around a pivot. Its moments of inertia is the ... more

Flywheel energy storage (Energy density)

A flywheel is a rotating mechanical device that is used to store rotational energy. Flywheel energy storage works by accelerating a rotor to a very high ... more

Shaft bending moment due to yaw (2-bladed rotor)

The shaft bending moment due to yaw depends on the blades of the rotor. In this case the rotor has 2 blades

... more

Moment of Inertia - Point mass

Moment of inertia is the mass property of a rigid body that determines the torque needed for a desired angular acceleration about an axis of rotation. ... more

...can't find what you're looking for?

Create a new formula