'

Search results

Found 1956 matches
Indicated airspeed (IAS) - compressible fluid

Indicated airspeed (IAS) is the airspeed read directly from the airspeed indicator (ASI) on an ... more

Exhaust Gas Velocity

A rocket engine nozzle is a propelling nozzle (usually of the de Laval type) used in a rocket engine to expand and accelerate the combustion gases produced ... more

Torque on a current-carring loop

When current is passed through the loops, the magnetic field exerts torque on the loops, which rotates a shaft. Electrical energy is converted to ... more

Indicated airspeed (IAS) - incompressible fluid

Indicated airspeed (IAS) is the airspeed read directly from the airspeed indicator (ASI) on an ... more

Inductance of a solenoid

A solenoid is a coil wound into a tightly packed helix. In physics, the term refers specifically to a long, thin loop of wire, often wrapped around a ... more

Backlash (due to operating center modifications)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

Darcy friction factor - Goudar–Sonnad equation (Variable q)

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Radius of the turn of leaning bike (for small steering angles)

This lean of the bike decreases the actual radius of the turn proportionally to the cosine of the lean angle. The resulting radius can be approximated ... more

Radius of the turn of an upright bike (for small steering angles)

In order for a bike to turn, that is, change its direction of forward travel, the front wheel must aim approximately in the desired direction, as with any ... more

Backlash (due to tooth thickness changes)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

...can't find what you're looking for?

Create a new formula