'

Search results

Found 905 matches
Bernoulli’s Equation (conservation of energy)

Bernoulli’s equation states that for an incompressible, frictionless fluid, the above mentioned sum is constant. If we follow a small volume of fluid along ... more

Mach Number (supersonic, calculated from Pitot Tube Pressure)

In fluid mechanics, Mach number (M or Ma) is a dimensionless quantity representing the ratio of speed of an object moving through a fluid and the local ... more

Enthalpy of isobaric process

An isobaric process is a thermodynamic process in which the pressure stays constant: ΔP = 0. The heat transferred to the system does work, but also changes ... more

Rayleigh number (for a uniform wall heating flux)

In fluid mechanics, the Rayleigh number (Ra) for a fluid is a dimensionless number associated with buoyancy-driven flow, also known as free convection or ... more

Hydrostatic Pressure - simplified version

In a fluid at rest, all frictional stresses vanish and the state of stress of the system is called hydrostatic.For water and other liquids, this integral ... more

Bernoulli's principle

Bernoulli’s principle states that for an inviscid flow, an increase in the speed of the fluid occurs simultaneously with an increase in dynamic ... more

Allowable Strength Design Load combination (eq5a)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Allowable Strength Design Load combination (eq5b)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Friction Loss (hydraulic slope)

In fluid flow, friction loss (or skin friction) is the loss of pressure or “head” that occurs in pipe or duct flow due to the effect of the fluid’s ... more

Allowable Strength Design Load combination (eq2)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

...can't find what you're looking for?

Create a new formula