'

Search results

Found 2135 matches
Thermal Diffusivity

In heat transfer analysis, thermal diffusivity (usually denoted α but a, κ and D are also used) is the thermal conductivity divided by density and specific ... more

Darcy friction factor - Goudar–Sonnad equation (Variable s)

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Darcy friction factor - Goudar–Sonnad equation (Variable D_LA)

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Characteristic velocity

Characteristic velocity or c*, or C-star is a measure of the combustion performance of a rocket engine independent of nozzle performance, and is used to ... more

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of ... more

Fourier number ( thermal )

The Fourier number (Fo) or Fourier modulus, is a dimensionless number that characterizes heat conduction. it is the ratio of diffusive/conductive transport ... more

Lundquist number

In plasma physics, the Lundquist number (denoted by S) is a dimensionless ratio which compares the timescale of an Alfvén wave crossing to the timescale of ... more

Specific gas constant (related to heat capacities)

The specific gas constant of a gas or a mixture of gases (Rspecific) is given by the molar gas constant divided by the molar mass (M) of the gas/mixture. ... more

Curve sight distance (Horizontal curves for highway design)

Horizontal alignment in road design consists of straight sections of road, known as tangents, connected by circular horizontal curves. Circular curves are ... more

Pressure to depth (empirical formula - fresh water)

In fresh water, there is an approximate numerical equivalence between the change in pressure in decibars and the change in depth from the surface in ... more

...can't find what you're looking for?

Create a new formula