'

Search results

Found 1056 matches
Difference between the maximum and the minimum height of a oloid

Oloid is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies ... more

Percentage overshoot (PO)

In signal processing, control theory, electronics, and mathematics, overshoot is the occurrence of a signal or function exceeding its target. It arises ... more

Time-domain reflectometry ( reflection coefficient-resistive load)

Time-domain reflectometry or TDR is a measurement technique used to determine the characteristics of electrical lines by ... more

Range of a projectile

In physics, assuming a flat Earth with a uniform gravity field, and no air resistance, a projectile launched with specific initial conditions will have a ... more

Time delay for a signal from Earth to a Satelite in geostationary orbit and back

A geostationary orbit, geostationary Earth orbit or geosynchronous equatorial orbit (GEO), is an orbit whose position in the sky ... more

Generalised logistic function (Richards' curve)

A logistic function or logistic curve is a common “S” shape (sigmoid curve) The generalized logistic curve or function, also known as ... more

Trajectory Height

A trajectory or flight path is the path that a moving object follows through space as a function of time. A trajectory can be described mathematically ... more

Fall Impact Force

In lead climbing using a dynamic rope, the fall factor (f) is the ratio of the height (h) a climber falls before the climber’s rope begins to stretch ... more

Allowable Strength Design Load combination (eq2)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Allowable Strength Design Load combination (eq5a)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

...can't find what you're looking for?

Create a new formula