'

Search results

Found 1572 matches
Crest curve length when S<L (Vertical curves for highway design)

Crest vertical curves are curves which, when viewed from the side, are convex upwards. This includes vertical curves at hill crests, but it also includes ... more

Sag curve length when S<L (Vertical curves for highway design)

When a driver is driving on a sag curve at night, the sight distance is limited by the higher grade in front of the vehicle. This distance must be long ... more

Sag curve length when S>L (Vertical curves for highway design)

When a driver is driving on a sag curve at night, the sight distance is limited by the higher grade in front of the vehicle. This distance must be long ... more

Moment of inertia of thick-walled cylindrical tube with open ends

Mass moment of inertia, measures the extent to which an object resists rotational acceleration about an axis, and is the rotational analogue to mass.
... more

Static balance

Rotating unbalance is the uneven distribution of mass around an axis of rotation. A rotating mass, or rotor, is said to be out of balance when its center ... more

Maximum value of bending moments for a cantilever beam with end load

A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is forced against by a moment and shear stress. A ... more

Moment of Inertia - Right Circular Cone - x and y axis

In physics and applied mathematics, the mass moment of inertia, usually denoted by I, measures the extent to which an object resists rotational ... more

Area Moment of Inertia - Circular Cross Section

The second moment of area, also known as moment of inertia of plane area, area moment of inertia, polar moment of area or second area moment, is a ... more

Derjaguin-Muller-Toporov (DMT) model of elastic contact between two spheres (contact radius)

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. The Derjaguin-Muller-Toporov (... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq2)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

...can't find what you're looking for?

Create a new formula