'

Search results

Found 1572 matches
Wind turbine yaw error

All wind turbines operate with a yaw error. In this case an extreme yaw error of 30 degrees is assumed. The flapwise blade root bending moment due to that ... more

Lensmaker's equation

A lens is a transmissive optical device which affects the focusing of a light beam through refraction. A simple lens consists of a single piece of ... more

Quadratic Equation 2nd Root

A quadratic equation with real or complex coefficients has two solutions, called roots. These two solutions may or may not be distinct, and they may or may ... more

Rouse Number

The Rouse number (P or Z) is a non-dimensional number in fluid dynamics which is used to define a concentration profile of suspended sediment and which ... more

Colpitts oscillator (frequency)

Colpitts oscillator is an oscillator that uses an LC circuit (also called a resonant circuit, tank circuit, or tuned circuit) combined with a transistor ... more

Auger electron spectroscopy - electron impact cross-section

Auger electron spectroscopy is a common analytical technique used specifically in the study of surfaces and, more generally, in the area of materials ... more

Sagnac effect (phase difference)

The Sagnac effect, also called Sagnac interference, named after French physicist Georges Sagnac, is a phenomenon encountered in interferometry that is ... more

Darcy friction factor - Blasius correlation

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Standard Gravitational Parameter - Two bodies orbiting each other

In celestial mechanics, the standard gravitational parameter μ of a celestial body is the product of the gravitational constant G and the mass M of the ... more

Backlash (due to operating center modifications)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

...can't find what you're looking for?

Create a new formula