# Search results

Many agencies and organizations (such as aerospace) define the margin of safety (MoS or M.S.) including the design factor, in other words, the margin of ... more

Many government agencies and industries (such as aerospace) require the use of a margin of safety (MoS or M.S.) to describe the ratio of the strength of ... more

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Mohr–Coulomb theory is a mathematical model describing the response of brittle materials such as concrete, or rubble piles, to shear stress as well as ... more

The probability distribution of the number Y = X − 1 of failures before the first success, supported on the set { 0, 1, 2, 3, ... } is giving by a form of ... more

In materials science fatigue occurs when a material is subjected to repeated loading and unloading. The failure of the material occurs when there are k ... more

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid ... more

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

In materials science, fatigue is the weakening of a material caused by repeatedly applied loads. Fatigue strength is a measure of the strength of a ... more

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Karl von Terzaghi was the first to present a comprehensive theory for the evaluation of the ultimate bearing capacity of rough shallow foundations. This ... more

Many government agencies and industries (such as aerospace) require the use of a margin of safety (MoS or M.S.) to describe the ratio of the strength of ... more

Karl von Terzaghi was the first to present a comprehensive theory for the evaluation of the ultimate bearing capacity of rough shallow foundations. This ... more

Karl von Terzaghi was the first to present a comprehensive theory for the evaluation of the ultimate bearing capacity of rough shallow foundations. This ... more

In 1954, Miles developed his version of this equation for GRMS as he was researching fatigue failure of aircraft structural ... more

Binomial distribution, with parameters n and p, is the discrete probability distribution of the number of successes in a sequence of n independent yes/no ... more

In science, buckling is a mathematical instability that leads to a failure mode.

When a structure is subjected to compressive stress, buckling may ... more

In science, buckling is a mathematical instability that leads to a failure mode.

When a structure is subjected to compressive stress, buckling may ... more

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts ... more

In the aerospace industry, the empirical methodology for evaluating the axial load capability of the clamp band joint assumes the joint components to be ... more

...can't find what you're looking for?

Create a new formula