# Search results

Found 1574 matches
Heat flow in electronics - maximum power dissipate

The heat flow can be modelled by analogy to an electrical circuit where heat flow is represented by current, temperatures are represented by voltages, heat ... more

Allowable Strength Design Load combination (eq5a)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

NTU method - the heat transferred between the fluids (q)

The Number of Transfer Units (NTU) Method is used to calculate the rate of heat transfer in heat exchangers (especially counter ... more

Calibrated airspeed from impact pressure - Subsonic speed

Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.

When flying at sea level ... more

Tetens equation (for temperatures above 0 °C)

The Tetens equation is an equation to calculate the saturation vapour pressure of water over liquid and ice. It is named after its creator, O. Tetens who ... more

Calibrated airspeed from impact pressure - Supersonic speed

Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.

When flying at sea level ... more

Friction Loss (turbulent flow)

In fluid flow, friction loss (or skin friction) is the loss of pressure or “head” that occurs in pipe or duct flow due to the effect of the fluid’s ... more

Rayleigh number (for a uniform wall heating flux)

In fluid mechanics, the Rayleigh number (Ra) for a fluid is a dimensionless number associated with buoyancy-driven flow, also known as free convection or ... more

Friction Loss (laminar flow)

In fluid flow, friction loss (or skin friction) is the loss of pressure or “head” that occurs in pipe or duct flow due to the effect of the fluid’s ... more

True Airspeed - High-speed flight (simplified, in knots)

The true airspeed (TAS; also KTAS, for knots true airspeed) of an aircraft is the speed of the aircraft relative to the airmass ... more

...can't find what you're looking for?

Create a new formula