'

Search results

Found 662 matches
Shear coefficient (For solid rectangular cross-section beam)

Timoshenko beam model takes into account shear deformation and rotational inertia effects, making it suitable for describing the behavior of short sandwich ... more

Shear modulus (related to Young's modulus and Poisson's ratio)

The shear modulus is one of several quantities for measuring the stiffness of materials and describes the material’s response to shear stress (like ... more

Transverse wave velocity (shear wave)

A transverse (shear) wave is a moving wave that consists of oscillations occurring perpendicular (or right angled) to the direction of energy transfer. For ... more

Micro chevron (MC) test (critical energy release rate)

The wafer bond characterization is based on different methods and tests. Wafer bonds are commonly characterized by three important encapsulation ... more

Strain energy release (Irwin's modification for plane strain)

A fracture is the separation of an object or material into two, or more, pieces under the action of stress.There are three ways of applying a force to ... more

Beam shear

Shear stress,is defined as the component of stress coplanar with a material cross section. The average shear stress is force per unit area. Beam shear is ... more

Critical Buckling Stress of a Column with Buckling Coefficient

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Moment of Inertia - I-Beam (Ideal cross section)

An I-beam, also known as H-beam, W-beam (for “wide flange”), Universal Beam (UB), Rolled Steel Joist (RSJ), or ... more

Maximum value of bending moments for a cantilever beam with uniformly distributed load

A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is forced against by a moment and shear stress. A ... more

Maximum value of bending moments for a cantilever beam with end load

A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is forced against by a moment and shear stress. A ... more

...can't find what you're looking for?

Create a new formula