'

Search results

Found 1753 matches
Bearing capacity for continuous foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Tuning fork (cylindrical prongs)

A tuning fork is an acoustic resonator in the form of a two-pronged fork with the prongs (tines) formed from a U-shaped bar of elastic metal (usually ... more

Maugis-Dugdale model of elastic contact between two spheres( contact force)

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Maximum deflection distance of an off-center loaded beam supported by two simple supports

In engineering, deflection is the degree to which a structural element is displaced under a load.
This maximum deflection occurs at a distance x_1 ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Moment of Inertia - Rod end

Moment of inertia is the mass property of a rigid body that determines the torque needed for a desired angular acceleration about an axis of rotation. ... more

Margin of safety for a failure load (measure of structural capacity)

Many government agencies and industries (such as aerospace) require the use of a margin of safety (MoS or M.S.) to describe the ratio of the strength of ... more

Allowable Strength Design Load combination (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Pressure distribution on a Contact Area between a rigid cylinder and an elastic half-space

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Relation among Young's modulus, Bulk modulus and Poisson's ratio

For homogeneous isotropic materials simple relations exist between elastic constants (Young’s modulus E, bulk modulus K, and Poisson’s ratio ν) ... more

...can't find what you're looking for?

Create a new formula