'

Search results

Found 1794 matches
Knuckle joint (Maximum bending stress)

A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, ... more

Knuckle joint (Moment about axis XX)

A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, ... more

Geometrical requirements for pin ended members - Given thickness

This formula calculates the geometrical requirements for pin ended members, specifically the minimum required distances from the pin hole edge to the plate ... more

Shear resistance of a pin

This formula calculates the shear resistance of a pin in a pin and plate connection.
From EN 1993-1-8 (2005) (English): Eurocode 3: Design of steel ... more

Maximum thermal efficiency of an Otto cycle

The constant volume adiabatic flame temperature is the temperature that results from a complete combustion process that occurs without any work, heat ... more

Beale number

In mechanical engineering, the Beale number is a parameter that characterizes the performance of Stirling engines. It is often used to estimate the power ... more

Thrust to Propulsive Power

Thrust is a reaction force described quantitatively by Newton’s second and third laws.
A very common question is how to contrast the thrust ... more

Maximum axial load that a long, slender, ideal column can carry without buckling

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Precession - (Torque-induced - Classical Newtonian)

Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the ... more

Brake clamp load

The clamping load is assumed to act on all friction surfaces equally. For dry disc brakes it doesn’t matter whether the brake is of the sliding type or ... more

...can't find what you're looking for?

Create a new formula