'

Search results

Found 1043 matches
The power to thrust ratio - rocket propulsion

Spacecraft propulsion is any method used to accelerate spacecraft and artificial satellites. Space propulsion or in-space propulsion exclusively deals with ... more

Simplified von Mises equation - Principal stresses

RESTRICTIONS : σ₁₂ = σ₁₃ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when the ... more

Simplified von Mises equation - General plane stress

RESTRICTIONS : σ₃ = 0, σ₃₁ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when ... more

Mean Motion

In orbital mechanics, mean motion (represented by ) is a measure of how fast a satellite progresses around its elliptical orbit. The mean motion is the ... more

Mohr–Coulomb failure criterion

Mohr–Coulomb theory is a mathematical model describing the response of brittle materials such as concrete, or rubble piles, to shear stress as well as ... more

Stokes's Law of Sound Attenuation

Stokes’s law of sound attenuation is a formula for the attenuation of sound in a Newtonian fluid, such as water or air, due to the fluid’s ... more

Normal segment for a given line

The normal segment for a given line is defined to be the line segment drawn from the origin perpendicular to the line. This segment joins the origin with ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq3a)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq6a)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Load and Resistance Factor Design (LRFD) - Load combinations (eq3b)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

...can't find what you're looking for?

Create a new formula