'

Search results

Found 1197 matches
Calibrated airspeed from impact pressure - Supersonic speed

Calibrated airspeed (CAS) is indicated airspeed corrected for instrument and position error.

When flying at sea level ... more

Water flux (Forward osmosis application)

Forward osmosis (FO) is an osmotic process that, like reverse osmosis (RO), uses a semi-permeable membrane to effect separation of water from dissolved ... more

Reynolds number (for motion of an object in a viscous fluid)

In fluid mechanics, the Reynolds number is used to help predict if flow will be laminar or turbulent. We know that the flow around a smooth, streamlined ... more

Darcy friction factor - Goudar–Sonnad equation

In fluid dynamics, the Darcy friction factor formulae are equations that allow the calculation of the Darcy friction factor, a dimensionless quantity used ... more

Thermal resistance due to fouling deposits (general)

Often during their use, heat exchangers collect a layer of fouling on the surface which, in addition to potentially contaminating a stream, reduces the ... more

Friis Transmission equation

The Friis transmission equation is used in telecommunications engineering, and gives the power received by one antenna under idealized conditions given ... more

Bose–Einstein statistics ( εi > μ)

In quantum statistics, Bose–Einstein statistics (or more colloquially B–E statistics) is one of two possible ways in which a collection of non-interacting ... more

Transistor regulator ( Rv providing a bias current)

In the simplest case a common collector transistor (emitter follower) is used with the base of the regulating transistor connected directly to the voltage ... more

Prandtl–Meyer expansion fan - Maximum turn angle

A supersonic expansion fan, technically known as Prandtl–Meyer expansion fan, is a centred expansion process that occurs when a supersonic flow turns ... more

Ideal gas - isothermal process function of volume

An isothermal process is a change of a system, in which the temperature remains constant: ΔT = 0. This typically occurs when a system is in contact with an ... more

...can't find what you're looking for?

Create a new formula

Search criteria:

Similar to formula
Category