'

Search results

Found 1320 matches
Strain energy release (Irwin's modification for plane stress)

A fracture is the separation of an object or material into two, or more, pieces under the action of stress.There are three ways of applying a force to ... more

Griffith's criterion in Linear elastic fracture mechanics (stress intensity factor)

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid ... more

Micro chevron (MC) test (critical energy release rate)

The wafer bond characterization is based on different methods and tests. Wafer bonds are commonly characterized by three important encapsulation ... more

Griffith's criterion in Linear elastic fracture mechanics (critical stress intensity factor)

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid ... more

Maszara model DCB test (surface fracture energy)

Wafer bonds are commonly characterized by three important encapsulation parameters: bond strength, hermeticity of encapsulation and bonding induced ... more

Maszara model DCB test (The compliance of a symmetric DCB speciment)

Wafer bonds are commonly characterized by three important encapsulation parameters: bond strength, hermeticity of encapsulation and bonding induced stress. ... more

Critical Buckling Compressive Loading of a Plate

In science, buckling is a mathematical instability that leads to a failure mode.

When a structure is subjected to compressive stress, buckling may ... more

Properties of concrete - modulus of elasticity

Concrete has relatively high compressive strength, but significantly lower tensile strength. As a result, without compensating, concrete would almost ... more

Shear modulus (related to Young's modulus and Poisson's ratio)

The shear modulus is one of several quantities for measuring the stiffness of materials and describes the material’s response to shear stress (like ... more

Fracture of ductile materials (Dissipated energy)

In ductile materials, a plastic zone develops at the tip of the crack. The plastic loading and unloading cycle near the crack tip leads to the dissipation ... more

...can't find what you're looking for?

Create a new formula