'

Search results

Found 1532 matches
Bearing capacity for circular foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Bearing capacity for continuous foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Ball Screw - Buckling Load

A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical ... more

Bend allowance

Bending is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in ductile materials, most commonly sheet ... more

Brushed DC electric motor - Voltage balance

A brushed DC motor is an internally commutated electric motor designed to be run from a direct current power source. Brushed motors were the first ... more

Heat transfer coefficient of pipe wall (using wall thickness)

The resistance to the flow of heat by the material of pipe wall can be expressed as a “heat transfer coefficient of the pipe wall”. However, ... more

Mass of pressure Cylindrical vessel with semi-elliptical ends

Pressure vessels are held together against the gas pressure due to tensile forces within the walls of the container. The normal (tensile) stress in the ... more

Gearing reduction ratio

Harmonic Drive is the brand name of strain wave gear trademarked by the Harmonic Drive company, and invented in 1957 by C.W. Musser.

It is very ... more

Desired radius of a curve

The equation for the desired radius of a curve, takes into account the factors of speed and superelevation (e). This equation can be algebraically ... more

Tensile Stress Area

Bolted joints are one of the most common elements in construction and machine design. They consist of fasteners that capture and join other parts, and are ... more

...can't find what you're looking for?

Create a new formula