'

Search results

Found 1025 matches
Moment of inertia of a thick-walled cylindrical tube ( Axis at the center of the cylinder perpendicular to its height)

Moment of inertia is the mass property of a rigid body that defines the torque needed for a desired angular acceleration about an axis of rotation. Moment ... more

Beam shear

Shear stress,is defined as the component of stress coplanar with a material cross section. The average shear stress is force per unit area. Beam shear is ... more

Lateral earth passive pressure (Rankine theory for horizontal backfill)

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Lateral earth passive pressure (Rankine theory)

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Lateral earth active pressure (Rankine theory for horizontal backfill)

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts active and ... more

Permeability of a material to air flow

The maximum depressurisation for a dynamically insulated building is normally limited to 10 Pa in order to avoid doors slamming shut or difficulty in ... more

Overall heat transfer coefficient

Heat transfer describes the exchange of thermal energy, between physical systems depending on the temperature and pressure, by dissipating heat. The heat ... more

Lateral earth active pressure (Rankine theory)

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. Rankine’s theory, is a stress field solution that predicts ... more

Turnbuckle (The direct shear stress induced in screw thread)

A mechanical joint is a part of a machine which is used to connect another mechanical part or mechanism. Mechanical joints may be temporary or permanent. ... more

Knuckle joint (Moment about axis XX)

A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, ... more

...can't find what you're looking for?

Create a new formula