'

Search results

Found 1027 matches
Bearing capacity for continuous foundations (Terzaghi's Theory)

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the ... more

Napoleon's theorem

In geometry, Napoleon’s theorem states that if equilateral triangles are constructed on the sides of any triangle, either all outward, or all inward, ... more

Semi-Elliptic Laminated Leaf Spring (Stiffness)

Leaf spring, commonly used for the suspension in wheeled vehicles. The term is also used to refer to a bundled set of leaf springs. As the spring flexes, ... more

Ideal gas - isobaric process

An isobaric process is a thermodynamic process in which the pressure stays constant: ΔP = 0. The heat transferred to the system does work, but also changes ... more

Equivalent airspeed (in function of dynamic pressure)

Equivalent airspeed (EAS) is the airspeed at sea level in the International Standard Atmosphere at which the dynamic pressure is ... more

Critical buckling stress of a column

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Internal energy isobaric process

An isobaric process is a thermodynamic process in which the pressure stays constant: ΔP = 0. The heat transferred to the system does work, but also changes ... more

Antenna Gain - Relative to a Dipole

In electromagnetics, an antenna’s power gain or simply gain is a key performance figure which combines the antenna’s directivity and electrical ... more

Force exerted by stretched or contracted material

In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighbouring particles of a continuous material exert on each ... more

Isentropic Relations for an Ideal Gas - Temperature and Pressure

In thermodynamics, an isentropic process is an idealized thermodynamic process that is adiabatic and in which the work transfers of the system are ... more

...can't find what you're looking for?

Create a new formula