'

Search results

Found 1280 matches
Maszara model DCB test (surface fracture energy)

Wafer bonds are commonly characterized by three important encapsulation parameters: bond strength, hermeticity of encapsulation and bonding induced ... more

Micro chevron (MC) test (critical energy release rate)

The wafer bond characterization is based on different methods and tests. Wafer bonds are commonly characterized by three important encapsulation ... more

Modulus of resilience

Resilience is the ability of a material to absorb energy when it is deformed elastically, and release that energy upon unloading. Proof resilience is ... more

Strain energy release (Irwin's modification for plane strain)

A fracture is the separation of an object or material into two, or more, pieces under the action of stress.There are three ways of applying a force to ... more

Derjaguin-Muller-Toporov (DMT) model of elastic contact between two spheres (contact radius)

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. The Derjaguin-Muller-Toporov (... more

Supersonic/Hypersonic Lift-to-Drag Ratio

In aerodynamics, the lift-to-drag ratio, or L/D ratio, is the amount of lift generated by a wing or vehicle, divided by the drag it creates by moving ... more

Entropy analysis - Trip distribution (proportional to trip origins and destinations)

Trip distribution (or destination choice or zonal interchange analysis) is the second component (after trip generation, but before mode choice and route ... more

Strain energy release (Irwin's modification for plane stress)

A fracture is the separation of an object or material into two, or more, pieces under the action of stress.There are three ways of applying a force to ... more

Q factor (RLC circuits)

Is the peak energy stored in the circuit divided by the average energy dissipated in it per cycle at resonance, and is the inverse of fractional bandwidth

... more

Bradley model of the force applied on a contact area between two spheres

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. When two solid surfaces are brought into close ... more

...can't find what you're looking for?

Create a new formula