'

Search results

Found 1244 matches
Pitch diameter - in imperial units (gears)

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque, in most cases with teeth ... more

Diametral pitch (transverse) - gears

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque, in most cases with teeth ... more

Backlash (due to tooth thickness changes)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

Backlash (due to operating center modifications)

In mechanical engineering, backlash, sometimes called lash or play, is clearance or lost motion in a mechanism caused by gaps between the parts. It can be ... more

Lead angle

Lead is the axial advance of a helix or screw during one complete turn (360°). The lead for a screw thread is the axial travel for a single revolution. ... more

Epicyclic gearing (overal gear ratio)

An epicyclic gear train consists of two gears mounted so that the center of one gear revolves around the center of the other. A carrier connects the ... more

Simple gear train with two gears (gear ratio in terms of radii of the gears and number of teeth)

The gear ratio of a gear train, also known as its speed ratio, is the ratio of the angular velocity of the input gear to the angular velocity of the output ... more

Chladni's Law

Chladni’s law, named after Ernst Chladni, relates the frequency of modes of vibration for flat circular surfaces with fixed center as a function of ... more

Gearing reduction ratio

Harmonic Drive is the brand name of strain wave gear trademarked by the Harmonic Drive company, and invented in 1957 by C.W. Musser.

It is very ... more

Nut Factor

Bolted joints are one of the most common elements in construction and machine design. They consist of fasteners that capture and join other parts, and are ... more

...can't find what you're looking for?

Create a new formula