'

Search results

Found 1424 matches
Worksheet 333

A typical small rescue helicopter, like the one in the Figure below, has four blades, each is 4.00 m long and has a mass of 50.0 kg. The blades can be approximated as thin rods that rotate about one end of an axis perpendicular to their length. The helicopter has a total loaded mass of 1000 kg. (a) Calculate the rotational kinetic energy in the blades when they rotate at 300 rpm. (b) Calculate the translational kinetic energy of the helicopter when it flies at 20.0 m/s, and compare it with the rotational energy in the blades. (c) To what height could the helicopter be raised if all of the rotational kinetic energy could be used to lift it?


The first image shows how helicopters store large amounts of rotational kinetic energy in their blades. This energy must be put into the blades before takeoff and maintained until the end of the flight. The engines do not have enough power to simultaneously provide lift and put significant rotational energy into the blades.
The second image shows a helicopter from the Auckland Westpac Rescue Helicopter Service. Over 50,000 lives have been saved since its operations beginning in 1973. Here, a water rescue operation is shown. (credit: 111 Emergency, Flickr)

Strategy

Rotational and translational kinetic energies can be calculated from their definitions. The last part of the problem relates to the idea that energy can change form, in this case from rotational kinetic energy to gravitational potential energy.

Solution for (a)

We must convert the angular velocity to radians per second and calculate the moment of inertia before we can find Er . The angular velocity ω for 1 r.p.m is

Angular velocity

and for 300 r.p.m

Multiplication

The moment of inertia of one blade will be that of a thin rod rotated about its end.

Moment of Inertia - Rod end

The total I is four times this moment of inertia, because there are four blades. Thus,

Multiplication

and so The rotational kinetic energy is

Rotational energy

Solution for (b)

Translational kinetic energy is defined as

Kinetic energy ( related to the object 's velocity )

To compare kinetic energies, we take the ratio of translational kinetic energy to rotational kinetic energy. This ratio is

Division

Solution for (c)

At the maximum height, all rotational kinetic energy will have been converted to gravitational energy. To find this height, we equate those two energies:

Potential energy

Discussion

The ratio of translational energy to rotational kinetic energy is only 0.380. This ratio tells us that most of the kinetic energy of the helicopter is in its spinning blades—something you probably would not suspect. The 53.7 m height to which the helicopter could be raised with the rotational kinetic energy is also impressive, again emphasizing the amount of rotational kinetic energy in the blades.

Reference : OpenStax College,College Physics. OpenStax College. 21 June 2012.
http://openstaxcollege.org/textbooks/college-physics
Creative Commons License : http://creativecommons.org/licenses/by/3.0/

Speed of Sound in Solids - long rods

The speed of sound is the distance travelled per unit of time by a sound wave propagating through an elastic medium.
The speed of sound for ... more

Volume Fraction of the Fibers (Rule of mixtures)

In materials science, a general rule of mixtures is a weighted mean used to predict various properties of a composite material made up of continuous and ... more

Hooke's law for continuous media

Hooke’s law states that the force needed to extend or compress a spring by some distance is proportional to that distance.The stresses and strains ... more

Shear coefficient (For solid circular cross-section beam)

Timoshenko beam model takes into account shear deformation and rotational inertia effects, making it suitable for describing the behavior of short sandwich ... more

Shear coefficient (For solid rectangular cross-section beam)

Timoshenko beam model takes into account shear deformation and rotational inertia effects, making it suitable for describing the behavior of short sandwich ... more

Speed of sound in three-dimensional solids (shear waves)

The speed of sound is the distance travelled per unit of time by a sound wave propagating through an elastic medium. Sound travels faster in liquids and ... more

Moment of Inertia - Rod end

Moment of inertia is the mass property of a rigid body that determines the torque needed for a desired angular acceleration about an axis of rotation. ... more

Perpendicular axis theorem ( at moments of inertia)

Perpendicular axis theorem (or plane figure theorem) can be used to determine the moment of inertia of a rigid object that lies entirely within a plane, ... more

Speed of sound in three-dimensional solids (pressure waves)

The speed of sound is the distance travelled per unit of time by a sound wave propagating through an elastic medium. Sound travels faster in liquids and ... more

...can't find what you're looking for?

Create a new formula